Im stuck
#1
Im stuck
allright so my mustangs had a hole in the line from the master clutch cylinder to my slave cylinder , we replaced the line and bled the clutch , then the clutch was hard as hell , my dumbass pressed it down with force breaking my master clutch cylinder and 2 sensors, so i replaced all of that , so the last thing i had to do was bleed my clutch , well we tried doing that and no fluid comes out at all and a few bubbles from time to time , but otherwise nothing ( bled the clutch for 3 hours ) , so my clutch pedal is stilll lose as hell , do you guys think that my slave cylinder got disconnected or went to crap all together , i do need help urgently , ps i got ram slave cylinder and im gonna drop the transmission tomorrow so i will have more info then
#3
allright , we found out that the clutch cylinder ford gave me was faulty , so i replaced it ......then i found out that a line ot my slave cylinder got disconnedcted since my clutch is hard as hell.....fml
Thread
Thread Starter
Forum
Replies
Last Post
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
09-26-2015 02:11 PM
mrmrultimate
Texas Regional Chapter
2
09-10-2015 09:43 AM