Remove Interior Winshield Moulding, 2005 Mustang Convertible
#1
Remove Interior Winshield Moulding, 2005 Mustang Convertible
I have a 2005 Mustang Convertible. I'm installing an electronic mirror and would like to hide the wiring underneath the winshield moulding. Does anyone know how to remove this moulding?
#3
RE: Remove Interior Winshield Moulding, 2005 Mustang Convertible
Check the main 05-06-07 page under informational documents, there is a pdf there with interior trim info from the service manual, and give it some more time for people to respond, sometimes it takes more than a couple hours for someone to notice the post, also the search function works wonders.
#5
RE: Remove Interior Winshield Moulding, 2005 Mustang Convertible
ORIGINAL: Hoppy
I have a 2005 Mustang Convertible. I'm installing an electronic mirror and would like to hide the wiring underneath the winshield moulding. Does anyone know how to remove this moulding?
I have a 2005 Mustang Convertible. I'm installing an electronic mirror and would like to hide the wiring underneath the winshield moulding. Does anyone know how to remove this moulding?
#6
RE: Remove Interior Windshield Moulding, 2005 Mustang Convertible
Amen JimC. When the vert is down and the mirror is flipped up all I see are street lights or the moon. The verts should come with an auto dimming mirror because the tilt up only works against a dark top and many times there is no dark top.
#7
RE: Remove Interior Winshield Moulding, 2005 Mustang Convertible
ORIGINAL: JimC
one thing I miss from my Explorer is the automatic dimming mirror at night
one thing I miss from my Explorer is the automatic dimming mirror at night
I have something like this on our convertible too it works great too ..... Oh, other people would call it a Saleen Supercharger!! It's a little harder to install and costs a bit more but WOW does it work well for dimming head lights in the mirror!
lol
05SDI
#8
RE: Remove Interior Winshield Moulding, 2005 Mustang Convertible
ORIGINAL: 05SDI
I have something like this on our convertible too it works great too ..... Oh, other people would call it a Saleen Supercharger!! It's a little harder to install and costs a bit more but WOW does it work well for dimming head lights in the mirror!
lol
05SDI
I have something like this on our convertible too it works great too ..... Oh, other people would call it a Saleen Supercharger!! It's a little harder to install and costs a bit more but WOW does it work well for dimming head lights in the mirror!
lol
05SDI
#9
RE: Remove Interior Winshield Moulding, 2005 Mustang Convertible
Turns out that removing the right side A-Pillar cover is simple, just pry down gently with a screw driver or other flat object and it will pop open. Installing the mirror and routing the electrical wires is simple after that. Finding a way to route the temperature sensor from the front of the car back into the passenger area was a pain. I finally brought it back through a rubber boot on the lower firewall near the smart junction box. I'll do the final hookup tonight (hopefully). If I had known exactly how to do everything, it would have taken a couple of hours - instead of several days!
The unit I bought is a Gentex 50-GENK20. You can find them lot's of places on the web.
The unit I bought is a Gentex 50-GENK20. You can find them lot's of places on the web.
Thread
Thread Starter
Forum
Replies
Last Post
'stangdude
4.6L V8 Technical Discussions
5
08-12-2015 01:27 PM