BRAIDED HOSES?
3rd Gear Member
Joined: Apr 2006
Posts: 537
From: Powder Springs, GA.
RE: BRAIDED HOSES?
ORIGINAL: Intrcepter
Here is mine- let me know what you think. They are kinda hard to see in the picture with the shaker scoop but I think they look real nice in real life.
[IMG]local://upfiles/28393/5C1E6023BFB14644BA69100BE3BEF90F.jpg[/IMG]
Here is mine- let me know what you think. They are kinda hard to see in the picture with the shaker scoop but I think they look real nice in real life.
[IMG]local://upfiles/28393/5C1E6023BFB14644BA69100BE3BEF90F.jpg[/IMG]
UB10
3rd Gear Member
Joined: Apr 2006
Posts: 537
From: Powder Springs, GA.
RE: BRAIDED HOSES?
ORIGINAL: Ruffnuts
where did u get the powered by ford emblem on your valve covers? they would look good on my black covers.
ORIGINAL: underbird10
I don't havce the stainless braided hoses, but the chrome tubing really dresses things up nicely.
UB10
[IMG]local://upfiles/35177/5AF0597A39754E5D9A0C4226D923AB9F.jpg[/IMG]
[IMG]local://upfiles/35177/8BB88C2B17DE44CCBDC088881DBADD82.jpg[/IMG]
I don't havce the stainless braided hoses, but the chrome tubing really dresses things up nicely.
UB10
[IMG]local://upfiles/35177/5AF0597A39754E5D9A0C4226D923AB9F.jpg[/IMG]
[IMG]local://upfiles/35177/8BB88C2B17DE44CCBDC088881DBADD82.jpg[/IMG]
Ebay. Search on "Powered by Ford".
UB10
5th Gear Member
Joined: Mar 2006
Posts: 2,179
From: Nor Cal
RE: BRAIDED HOSES?
ORIGINAL: underbird10
Richard,
Where'd you get the oil filler cap?
Looks nice.
UB10
Richard,
Where'd you get the oil filler cap?
Looks nice.
UB10
Richard
3rd Gear Member
Joined: Aug 2005
Posts: 882
From: New Braunfels, TX
RE: BRAIDED HOSES?
ORIGINAL: hawgman
Uh... explain to me how the hell you intended to cut steel braided hoses with sissors? This isn't that cheap *** sleeving you put over stock hoses. It is actual steel braided line I purchased in bulk, bought the fittings,and built the hoses.
The way you cut it is to measure out the hose length needed then wrap where you want to cut with electrical tape. Take a hacksaw and cut in the middle of the tape. That way it doesn't fray out and make hamburger out of your fingers when you are putting on the ends.
ORIGINAL: dkano
What did you use to cut the braided lines to fit? I have this same kit sitting in my garage, tried cutting the lines with a pair of scissors but it was a PIA!
What did you use to cut the braided lines to fit? I have this same kit sitting in my garage, tried cutting the lines with a pair of scissors but it was a PIA!
The way you cut it is to measure out the hose length needed then wrap where you want to cut with electrical tape. Take a hacksaw and cut in the middle of the tape. That way it doesn't fray out and make hamburger out of your fingers when you are putting on the ends.
1st Gear Member
Joined: Oct 2005
Posts: 57
From:
RE: BRAIDED HOSES?
[/align]
[blockquote]
ORIGINAL: my77stang
hey underbird, you are the first one i have seen on here with that CAI.... i have a knock off of the typhoon, check it out:
hey underbird, you are the first one i have seen on here with that CAI.... i have a knock off of the typhoon, check it out:
4th Gear Member
Joined: Nov 2005
Posts: 1,249
From: Northern VA
RE: BRAIDED HOSES?
yea there nice,
[IMG]local://upfiles/25187/4301450A50F24229BD47738F3867465A.jpg[/IMG]
[IMG]local://upfiles/25187/9D6B771ADE834E01882EB6C88EFB991E.jpg[/IMG]
[IMG]local://upfiles/25187/E13945D0D53E4D66803C4C9CB2FCFDFC.jpg[/IMG]
[IMG]local://upfiles/25187/4301450A50F24229BD47738F3867465A.jpg[/IMG]
[IMG]local://upfiles/25187/9D6B771ADE834E01882EB6C88EFB991E.jpg[/IMG]
[IMG]local://upfiles/25187/E13945D0D53E4D66803C4C9CB2FCFDFC.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
Sep 16, 2015 07:53 PM
TfcCDR
V6 (1994-2004) Mustangs
1
Sep 14, 2015 12:08 PM
