Billet Fuel Door Install??
#1
Billet Fuel Door Install??
Does anyone have a how-to on removing the originalfueldoor and replacing w/ a Billet fuel door...... i looked at my stock gas cap door and can't seem to understand how to remove that and how the billet's fit in????
#2
RE: Billet Fuel Door Install??
Taco Bill had a how to on this, but I don't see it on the sticky....Anyway, short version....
Open your fuel door. There are two bolts by the hinge. Remove those. The door will now come off. Remove the two rubber bumpers on the right side that your old fuel door used to slam against...
The new fuel door should have fourstuds on the back of the ring part. Those four studs go into the four holes noted above, along with some nylon spacers. Adjust depth with spacers, and place a nut on the back of each stud.
There ya go.
Mike
Open your fuel door. There are two bolts by the hinge. Remove those. The door will now come off. Remove the two rubber bumpers on the right side that your old fuel door used to slam against...
The new fuel door should have fourstuds on the back of the ring part. Those four studs go into the four holes noted above, along with some nylon spacers. Adjust depth with spacers, and place a nut on the back of each stud.
There ya go.
Mike
#6
#7
RE: Billet Fuel Door Install??
Thread
Thread Starter
Forum
Replies
Last Post
Granatelli Sales
Vendor For Sale / Group Buy Classifieds
2
12-18-2015 06:22 PM
HorsePower99
4.6L (1996-2004 Modular) Mustang
1
08-26-2015 11:29 PM