Sometimes the solution to the problem is right in front of you.

At least, I hope that is the case. The last issue was check engine light coming on after loading the 89 & 91 tunes. Chandler, from my last call in May, suggested that I pull DTC #'s. I don't know why I didn't just do that in the first place. I keep forgetting that the tuner can be used for more than just loading tunes. I reloaded the 91 tune and pulled the codes. Code 155 & 161 came up. I reset the codes and did a test drive. I ran it hard through 2nd and 3rd gear. So far no codes. I'll drive it around for the next week and see what happens. Hopefully, this will be the end of it.

 

Brenspeed is the hotness. They have really helped me on my car and they have treated me above and beyond what ANYONE could expect from ANY company. It's why I run their banner on my car, and will continue to do so.

 

Proud owner of a brenspeed tune!

 

I just had my Saleen installed there and again great service and very nice to deal with. Guest house was super clean and there shop matches!

Also they have a guest book in there guest house, there is a reason people come from all over, I saw Florida, Texas, New Jersey, Washington (Not DC) and yes Alaska! Guess I'm luck there only about 2.5 hours from me but the service is top notch and I will recommend them to anyone I can.