Spindle
Thread Starter
Joined: Dec 2006
Posts: 2
Spindle
Was there only one spindle produced for 67 mustangs? I am going from a 6 cylinder to a small block V8 and don't know if the original spindles are OK for the V8. Looking around, I can only find one part # for the 67 spindle.
1st Gear Member
Joined: Apr 2006
Posts: 138
From:
RE: Spindle
Hey,
If I am not mistaken, the spindles for the '67 mustang are the same for the 200ci V6, 289ci V8 and the 390ci V8 big block. The stock spindles on your V6 '67 should be fine for a small block V8 swap.
Good Luck
If I am not mistaken, the spindles for the '67 mustang are the same for the 200ci V6, 289ci V8 and the 390ci V8 big block. The stock spindles on your V6 '67 should be fine for a small block V8 swap.
Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
CrdStang
General Tech
1
Sep 19, 2005 01:02 AM