Docolds1966

106k miles. owned since new. all of a sudden when driving the wrench symbol and check engine light popped on and the throttle acts like it is no longer connected. i cleaned the throttle body, changed the sensor in the air intake.hose and wiped the codes but same thing. idles perfectly but will not increase at all rpm when throttle is pushed?

JimC

What are the codes?

Docolds1966

p0108

heyseeoh

Looks like that code points to the MAP sensor. However, a Google search that linked to another Mustang forum says it’s likely the EGR that needs to be replaced. Couldn’t hurt to clean the MAP as well if you haven’t yet. CRC makes a mass air flow sensor cleaner.