PI Intake
#1
PI Intake
I still have non-PI heads on my car and have a PI intake in my garage. I have heard about a spacer that you can use to put the PI intake on my non-PI heads. Is there any truth to this and where can I find this spacer. Any idea on what one cost too. I have a ported and polished stock plenum and new TB I am puting on and would like to do the intake at the same time since the intake is the bottle neck of the non-PI head set up. Any info would be great.
#2
RE: PI Intake
http://www.livernoismotorsports.com/product.phtml?p=457
complete kit at link, a little expensive. does sound like a great upgrade for non-pi heads
complete kit at link, a little expensive. does sound like a great upgrade for non-pi heads
#3
RE: PI Intake
That price is a rip off. You can do a complete head and intake swap for about that much money. The hood clearance issue may pose a problem though because the spacers will raise the intake slightly, which is why they modify theirs. I don't know, if you are willing to spend that much money on just the intake, it's a waste IMO. If you're going to spend that much, do the heads also, because they are a bottleneck as well, not just the intake.
#5
RE: PI Intake
ORIGINAL: mdvaldosta
you don't "need" spacers, it can be made to work without them but maybe not as well since the ports won't line right up.
you don't "need" spacers, it can be made to work without them but maybe not as well since the ports won't line right up.
#7
RE: PI Intake
Was that swap in a magazine article or just word of mouth. I would like to read something like that to see how it all goes. I know that I can change the intake out. Just don't want to screw anything up while I am doing it. I would also like to see if there really is a increase even though the mismatching ports. I didn't know that I could just change them out and it would work. But yea for 600 bucks I could almost change the heads out. I already have ported and polished PI heads and matching intake just don't have the cash onhand to do the swap. When I do the swap I am going to get blower cams and do it all right the first time. I was going to wait till I go to school at Wyo Tech and do it all myself. Just looking to get a few more horses out of my baby till then.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM