Help with PI Swap! Coolant tube in the valley!!!
#21
RE: Help with PI Swap! Coolant tube in the valley!!!
The stock cable is pretty long. I'm just going to lay it on the rack... My coolant tuce goes past where it should bolt on the head...? Should I try to use the old one? It's shorter than the new one I got, but I was told it won't clear the PI intake manifold.
#22
RE: Help with PI Swap! Coolant tube in the valley!!!
Hmm. I'd say use the shorter one so that it bolts to where it should. I have never heard or can think of why it wouldn't clear the intake manifold. I'd say ask oxfordgt, he is an expert.
#23
RE: Help with PI Swap! Coolant tube in the valley!!!
Do you know what the motor mount bolts look like? All of my bolts are in a pile and I can't figure out which ones are for the motor mounts. Also, would you know if all of the trans bolts are the same length or if some are shorter than the others? I have 4 that I know are the bolts for it, but the last 2 I can't find. Maybe they're different lengths...?
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM