PI manifold on non-PI head plates
#31
RE: PI manifold on non-PI head plates
i know this is an old post but i was just wondering if anyone bought any of the plates and if they did-how did they work out?.... so all you need is a PI intake and these plates and you are set, right?
#32
RE: PI manifold on non-PI head plates
I will be selling the plates listed and they are not available yet.
you will need gaskets PI and non-PI plates, 99 tp 2004 manifold and the cooling tube
that is located under the manifold. I recommend two new o-rings for the tube
and one o-ring for the thermostat. anything beyond that is up to you.
manifold was about $190, plate $100, tube $25, gaskets/o-rings maybe $40
now you will not have vacuum leaks, & poor port matchup=low HP gain.
this beats pulling the manifold because you sucked in the RTV or something worse yet.
you will need gaskets PI and non-PI plates, 99 tp 2004 manifold and the cooling tube
that is located under the manifold. I recommend two new o-rings for the tube
and one o-ring for the thermostat. anything beyond that is up to you.
manifold was about $190, plate $100, tube $25, gaskets/o-rings maybe $40
now you will not have vacuum leaks, & poor port matchup=low HP gain.
this beats pulling the manifold because you sucked in the RTV or something worse yet.
#34
RE: PI manifold on non-PI head plates
finally got plates if anyone is interested
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I will post more as I sell them
$100, site is www.unitedmajority.com it has instructions with pic
[IMG]local://upfiles/9943/E945497167FF44AAB6C94FF335BBFB63.jpg[/IMG]
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I will post more as I sell them
$100, site is www.unitedmajority.com it has instructions with pic
[IMG]local://upfiles/9943/E945497167FF44AAB6C94FF335BBFB63.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post