4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

noisy

Thread Tools
 
Search this Thread
 
Old 11-29-2007, 09:48 PM
  #1  
ShadowGGT
Thread Starter
 
ShadowGGT's Avatar
 
Join Date: Nov 2007
Posts: 5
Default noisy

My rear end makes an annoying noise when i turn corners after its all warmed up and stuff, i was wondering if anyone could help me figure it out. Im guessing its my differetial going bad but that might be too obvious and if so where could i get a limited slip axle assembly? Thanx.
Oh and one more thing, why is it called a modular? Im pretty new to the whole Ford thing and its totally different that the Dodges im used to handling. Thanx again
ShadowGGT is offline  
Old 11-29-2007, 10:01 PM
  #2  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default RE: noisy

DO a burn out and see if both tires spin out. I'd bet your T-lock and one of your gears have shaved a tooth.
Sxynerd is offline  
Old 11-29-2007, 10:37 PM
  #3  
97targa
5th Gear Member
 
97targa's Avatar
 
Join Date: Apr 2006
Posts: 3,625
Default RE: noisy

cluck around a turn def shows symptoms of worn out carrier. Make sure it's not your suspension before you go ripping your differential all apart
97targa is offline  
Old 11-29-2007, 10:48 PM
  #4  
ShadowGGT
Thread Starter
 
ShadowGGT's Avatar
 
Join Date: Nov 2007
Posts: 5
Default RE: noisy

actually its more of a slight whine, it only does it when i do really sharp turns at 5-10 miles. But ill try the burn out tomorrow anyway just to find out bout the limited slip...
ShadowGGT is offline  
Old 11-29-2007, 11:12 PM
  #5  
GhostRider02GT
5th Gear Member
 
GhostRider02GT's Avatar
 
Join Date: Feb 2007
Location: the flatlands
Posts: 3,456
Default RE: noisy

ORIGINAL: ShadowGGT

actually its more of a slight whine, it only does it when i do really sharp turns at 5-10 miles. But ill try the burn out tomorrow anyway just to find out bout the limited slip...
Im thinking whoever swapped out your rear fluid forgot friction modifier. I know I did, got that noise, stopped giving a crap b/c its getting replaced anyways with 31spline assembly
GhostRider02GT is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
robjh22
Suspension
0
09-08-2015 12:47 PM
HorsePower99
4.6L (1996-2004 Modular) Mustang
1
08-26-2015 11:29 PM
HorsePower99
General Tech
2
08-26-2015 08:32 PM
alymac
New Member Area
2
08-26-2015 07:46 AM
mustang88_cars
5.0L (1979-1995) Mustang
5
08-27-2006 10:03 PM



Quick Reply: noisy



All times are GMT -5. The time now is 11:04 PM.