cgarray17

This is for my uncle who has a 96 mustang GT and probably like most his intake cracked at the thermostat and he tryed to patch it but it still leaks fluid. I was looking to get him a new one for him for his birthday but cant really find one, so i was trying to find him a better one that will not crack again.any info or segestions with a websight i could look at would be great.
Thanks

Swamp

Check ebay, I have seen some PI intake kits you can use the on the non pi motor. They run about 280 ish? The Pi intake has a aluminum cross over that will not crack.

1fstblckgt

http://www.blueovalindustries.com/pr...?catID=9902249

http://www.blueovalindustries.com/pr...p?pid=99011777



PI manifold on NON-PI heads.
https://mustangforums.com/m_3833004/tm.htm


There ya go...

cgarray17

ok thanks, that is a little more then i was looking to spend so i think i will just get a oem one for now and if it cracks again then we will go from there. does any one know where i can find a stock one?

1fstblckgt

You can get a stock one from Oreilly's autoparts, autozone, etc.... Just make sure it has the aluminum crossover.

1fstblckgt

http://cgi.ebay.com/ebaymotors/96-97...spagenameZWDVW

cgarray17

Thanks that is just what i was looking for a stock intake with the aluminum crossover for about 180 perfict.
Thanks

1fstblckgt

Not a problem.

JayDs Ibanez

you can get npi intakes from ebay for around 80 with the aluminum crossover