99-04 4.6 Engine Swap
#11
ok hold on here... let me think.... you are going to have to buy a flywheel if the engine doesn't come with one. Because your flywheel is an 8bolt and your new one will be a 6 bolt.
The flywheel for the 96-98 (stock comes as 10.5"),which use the T-45 trans, is the same as the flywheel for the mid 01-04 (stock comes with 11"), which use the 3650 trans.
That means the clutch for the T-45 and the clutch for the 3650 would have the same bolt pattern to the fly wheel. The 03, if it comes with a flywheel should be an 11", 6 bolt flywheel and your 11", 8 bolt clutch should bolt to it.
I'm sorry if this doesn't make any sense... I confused myself half way through this and I think I fixed it but not sure.
The flywheel for the 96-98 (stock comes as 10.5"),which use the T-45 trans, is the same as the flywheel for the mid 01-04 (stock comes with 11"), which use the 3650 trans.
That means the clutch for the T-45 and the clutch for the 3650 would have the same bolt pattern to the fly wheel. The 03, if it comes with a flywheel should be an 11", 6 bolt flywheel and your 11", 8 bolt clutch should bolt to it.
I'm sorry if this doesn't make any sense... I confused myself half way through this and I think I fixed it but not sure.
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM