stock 2.3 issue
#1
stock 2.3 issue
I am having issues with my 2.3. I took it to a reputable mechanic after a month or 2 of checking and looking over my self and he said he couldn't find the problem and I would have to take it to a dealer. The car starts and runs great until it warms up. then my idle , cant seem to hold a specific rpm. When driving after warmed up it has no low end power at all., push the accelerator down more and she opens up with lots of power. (for a stock 4 clyn.) Basically once its warmed up I cant drive it normal I have to drive it like I stole it.
#6
I am having issues with my 2.3. I took it to a reputable mechanic after a month or 2 of checking and looking over my self and he said he couldn't find the problem and I would have to take it to a dealer. The car starts and runs great until it warms up. then my idle , cant seem to hold a specific rpm. When driving after warmed up it has no low end power at all., push the accelerator down more and she opens up with lots of power. (for a stock 4 clyn.) Basically once its warmed up I cant drive it normal I have to drive it like I stole it.
Last edited by mjr46; 02-18-2015 at 12:00 PM.
#7
it depends on who works there..........all that is needed for diagnosis to begin is either a scan tool for obd 1 or the paper clip method to run a koeo/koer test to check for codes...after that most will still have a break out box to check all input PIDS.
Thread
Thread Starter
Forum
Replies
Last Post