Twotone93stang

I found a Trick Flow kit that consisted of Twisted wedge heads, street intake manifold, roller camshaft, roller rocker arms, pushrods, timing chain set, gasket kit, and value covers to match. I found this kit for $2149.00 in my 5.0 Mustang magazine. Is this a good deal because i am thinking about getting it for my 93' 5.0 gt Mustang

Tims 88GT

Trick flow has some awesome ****, u will like it if u get it.

crazyhorse

i have that same kit on my 93 gt . it is good . i would not change any thing if i was doing it again. i like it . you know you can get it with black or silver intake/valve covers/ stage 2 cam / tall valve covers & etc if you like ? this is from summit racing.

AdderMk2

did you have to notch your pistons to run it... which cam do you have... let us know the specifics

crazyhorse

did not notch pistons these are the twisted wedge heads . they have the 2.02 valves but the valve pocket is turned/or twisted so it will not hit the piston on the 5.0. not sure on the 86 year. i have the stage 1 cam but if you are not using it for a daily driver you could use the stage 2 cam. also if you get the tall valve covers you may have to run a intake spacer and there fore a cowl hood. the parts in this kit all fit & work good together, i had no problems & i liked that . the rocker are adjustable & push rods are correct . hope this helps .who are you ordering from?

AdderMk2

summit more then likely

crazyhorse

i forgot to mention , you can also get the track heat intake & stage 2 or 3 cam. just don't over do it if you are going to daily drive it or do a lot of city driving. good luck.