88BlueGT

Just wondering... how would you compare a set of Edelbrock Performer RPM heads against a set of AFR's for a 302? Is there that much of a difference in powergain between the two, quality, etc. etc. etc. Please lend any information you have... I wanted to get a set of AFR's but I came across a good deal on a set of Edelbrocks.... thats why I am asking.

PX429

Depends on how good the deal is. I beleive the differance is a lot, something around 30hp differance. just remember afr's are about 1300

88BlueGT

Difference in AFR's being better right?

myshifter

I could find 30+hp in a set of afr's vs edel's but hw much are the edels would be the determining factor. Edelbrock is like the jack of all trades compnay, by no means are they a hardcore racing development company. They put out a zillion products that are good, small specialized compnaies put out very few products, but they are great.

88BlueGT

I see what you are saying. For now, let this thread die out because I dont know if I am going this route. If I do, I will pick the thread back up. Thanks guys.

Dan

r.barn

numbers talk

check out the different flow numbers, AFR's have the best, but cost the most.
per dollar spent vs. hp gained they are very comparable.

Ecstasy

dont take it you have a chart like that for intakes?