5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

re post is this a good time

Thread Tools
 
Search this Thread
 
Old 12-30-2004, 04:26 PM
  #1  
redsn95
Thread Starter
 
redsn95's Avatar
 
Join Date: Dec 2004
Location:
Posts: 46
Default re post is this a good time

I put up a post to see if I had a good time but I did'nt have my time slip. My mods are 4.10s, upper and lower control arms, pulleys, cold air, 75mm maf, x-pipe with cats, borlas with turn downs. On 18in street tires and no hook I ran in the 1/8 60ft was 2.114, 330ft 6.032, 1/8 9.244 @ 76.41 mph BTW its a 95 gt 5spd with 120,000 miles
redsn95 is offline  
Old 12-30-2004, 04:30 PM
  #2  
bobby
5th Gear Member
 
bobby's Avatar
 
Join Date: Oct 2003
Location: Mishawaka,Indiana
Posts: 3,742
Default RE: re post is this a good time

you got could get some lower 6 foots, obviously you were slipping quite a bit..........................
bobby is offline  
Old 12-30-2004, 04:45 PM
  #3  
mdvaldosta
I ♥ Acer
 
mdvaldosta's Avatar
 
Join Date: Sep 2003
Location: United States
Posts: 8,826
Default RE: re post is this a good time

looks like the car probably doesn't have much else left in it, getting a lower 60' will dramatically help your times, if you can get down into the 1.9's you'd make it into the 13's, your gonna need some sort of drag radial for that though.
mdvaldosta is offline  
Old 12-30-2004, 04:52 PM
  #4  
nemethjames1
4th Gear Member
 
nemethjames1's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 1,665
Default RE: re post is this a good time

ya drag radials would help out alot i think
nemethjames1 is offline  
Old 12-31-2004, 01:35 PM
  #5  
roundman
5th Gear Member
 
roundman's Avatar
 
Join Date: Mar 2004
Location:
Posts: 4,813
Default RE: re post is this a good time

ORIGINAL: mdvaldosta

looks like the car probably doesn't have much else left in it, getting a lower 60' will dramatically help your times, if you can get down into the 1.9's you'd make it into the 13's, your gonna need some sort of drag radial for that though.
Hey Joe, why didn't you tell him to go to the street and strip section and check out some of the ET's posted in your sticky at the top of the section???? just a thought!
roundman is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
09-20-2022 01:04 AM
drfister
2005-2014 Mustangs
11
05-03-2018 10:38 PM
Faolan65
Arizona Regional Chapter
0
08-25-2015 09:24 AM
jpplaw
4.6L V8 Technical Discussions
0
08-22-2015 09:29 PM
Stilz
New Member Area
3
08-19-2015 06:17 AM



Quick Reply: re post is this a good time



All times are GMT -5. The time now is 12:16 AM.