Stuck Heads
06-12-2007, 11:02 AM
#11
5th Gear Member
Join Date: Oct 2005
Location: Ohio USA
Posts: 4,616
RE: Stuck Heads
ORIGINAL: blkonblk5.0
big screw driver or prybar...when i did my motor the old heads came right off no problem...
big screw driver or prybar...when i did my motor the old heads came right off no problem...
06-12-2007, 11:54 AM
#12
2nd Gear Member
Join Date: Apr 2007
Location:
Posts: 230
RE: Stuck Heads
ORIGINAL: aode06
you stick the prybar in the intake hole of the heads and pry up if your not reusing them, mine fought me, and the lower intake was the worst!
ORIGINAL: blkonblk5.0
big screw driver or prybar...when i did my motor the old heads came right off no problem...
big screw driver or prybar...when i did my motor the old heads came right off no problem...
...I know its stupid and I know it will f**k some stuff up but I didnt jam it between the block and bottom of head..i got new heads too
06-12-2007, 11:57 AM
#13
5th Gear Member
Join Date: Oct 2005
Location: Ohio USA
Posts: 4,616
RE: Stuck Heads
ORIGINAL: blkonblk5.0
...I know its stupid and I know it will f**k some stuff up but I didnt jam it between the block and bottom of head..i got new heads too
ORIGINAL: aode06
you stick the prybar in the intake hole of the heads and pry up if your not reusing them, mine fought me, and the lower intake was the worst!
ORIGINAL: blkonblk5.0
big screw driver or prybar...when i did my motor the old heads came right off no problem...
big screw driver or prybar...when i did my motor the old heads came right off no problem...
...I know its stupid and I know it will f**k some stuff up but I didnt jam it between the block and bottom of head..i got new heads too
I never had none, never used em
Thread
Thread Starter
Forum
Replies
Last Post
