5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Heads? Help me figure out what type of heads I have...

Thread Tools
 
Search this Thread
 
Old 09-13-2008, 10:01 AM
  #1  
Kasavage
1st Gear Member
Thread Starter
 
Kasavage's Avatar
 
Join Date: Jul 2008
Location: Florida
Posts: 52
Default Heads? Help me figure out what type of heads I have...

I have attached some pictures, so just let me know what you guys think. I think I have the stock GT40's that came with the 93 cobra engine, but I could be wrong. Thanks.





Kasavage is offline  
Old 09-13-2008, 10:10 AM
  #2  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

they look like stock e7 heads most likely, as they are pedastal mount rockers and looks as if they have been rebuilt/had a valve job done due to the shims I see under the springs, you'd have to have the heads off to get casting numbers from the under side of the intake runner lip
mjr46 is offline  
Old 09-13-2008, 10:31 AM
  #3  
ewgoetz
3rd Gear Member
 
ewgoetz's Avatar
 
Join Date: Nov 2007
Location: Venice, FL
Posts: 912
Default

iron GT40's will have a GT stamped by the number 1 sparkplung like below.
ewgoetz is offline  
Old 09-13-2008, 12:59 PM
  #4  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

^^^^it'll also say gt-40 in the valvetrain area if they were such
mjr46 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2007CalSpec
2005-2014 Mustangs
7
12-13-2020 11:42 AM
clowe1965
Carolina Regional Chapter
34
09-28-2015 09:18 PM
ctgreddy
Street/Strip
11
09-20-2015 08:35 PM
EASTIDEE123
5.0L (1979-1995) Mustang
14
09-14-2015 03:52 PM
cbird1177711
2005-2014 Mustangs
3
09-02-2015 08:51 PM



Quick Reply: Heads? Help me figure out what type of heads I have...



All times are GMT -5. The time now is 04:23 AM.