Bad Ignition coil? - MustangForums.com

Notices
5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Bad Ignition coil?

Reply

 
 
 
Old 08-12-2018, 08:53 PM
  #1  
Sturm
1st Gear Member
Thread Starter
 
Sturm's Avatar
 
Join Date: Apr 2010
Location: Minnesota
Posts: 76
Default Bad Ignition coil?

Put in Motorsport plug wires, motorcraft Ignition coil, Distributor cap and rotor. Run and Idles Great! Just have this buzzing and lite ticking from my Ignition coil area. Is my Ignition coil bad....
Sturm is offline  
Reply With Quote
Old 08-13-2018, 09:27 AM
  #2  
dawson1112
5th Gear Member
 
Join Date: Jul 2012
Location: ohio
Posts: 3,549
Default

Open the hood at night in a dark area and start the car. If its jumping out of the wires or coil someplace you will be able to see it.
dawson1112 is offline  
Reply With Quote
Old 08-13-2018, 04:25 PM
  #3  
Sturm
1st Gear Member
Thread Starter
 
Sturm's Avatar
 
Join Date: Apr 2010
Location: Minnesota
Posts: 76
Default

Update:
Last night poped hood saw no arcing anywhere did the water bottle trick....I remembered I kept old one, swapped out old Ignition coil no buzzing or ticking. Never came across a very loud one? Bought it from rockauto did a warranty replacement.
Sturm is offline  
Reply With Quote
Old 08-14-2018, 02:59 PM
  #4  
Derf00
6th Gear Member
 
Join Date: Feb 2005
Location: AZ
Posts: 11,434
Default

Yeah, it's possible the coil had insufficient insulating fluid in it. That would allow arcing inside the coil that would sound like buzzing. Good they swapped for you. Problem solved?
Derf00 is offline  
Reply With Quote
Old 08-15-2018, 02:53 PM
  #5  
Sturm
1st Gear Member
Thread Starter
 
Sturm's Avatar
 
Join Date: Apr 2010
Location: Minnesota
Posts: 76
Default

Well got a new from rockauto in the mail. How COW this one is louder then the first one? It's just a OEM Ford part. On the box it says made from Poland...I really don't see that being a big deal. My stock orignal one is super quiet! I wonder if this is normal now? I'll try to get a hold of rockauto customer service. I've bought from them almost 7 years never an issue? Maybe I'll just keep the old one in.....
Sturm is offline  
Reply With Quote
Old 08-15-2018, 03:28 PM
  #6  
Urambo Tauro
3rd Gear Member
 
Urambo Tauro's Avatar
 
Join Date: Aug 2015
Location: SE Michigan
Posts: 831
Default

I've heard of loose spark plugs causing this, where the noise was a symptom of spark taking an alternate path (one of least resistance). I would ask you to double-check all ignition-related electrical connections, but the way your old coil still seems to work quietly suggests that you've already narrowed it down.
Urambo Tauro is offline  
Reply With Quote
Old 09-11-2018, 02:45 PM
  #7  
yurizx6r
3rd Gear Member
 
yurizx6r's Avatar
 
Join Date: Sep 2011
Location: Florida
Posts: 630
Default

I have found the Screamin Demon coils to be very good. Worth the extra money. Had nothing but issues with MSD.
yurizx6r is offline  
Reply With Quote
Old 09-14-2018, 08:52 AM
  #8  
wbrockstar
2nd Gear Member
 
wbrockstar's Avatar
 
Join Date: Jul 2017
Location: Tn
Posts: 222
Default

Man,quality parts are getting hard to come by aren't they,whether they're manufactured here or overseas?? Luckily Ive never had a bad part from RockAuto because if you're working on your only vehicle or the only daily driver you've got,waiting days to get a part is bad enough,but to then have to turn around and ship that part back and wait on another one to arrive because it was defective,can really get someone in trouble.I read that the difference in the makeup of a part on something even as simple as a pcv valve,can differ greatly between brands.The flow rate/metering of air through a generic brand pcv valve vs the Motorcraft brand,was far enough off that a difference was seen.This is just one example.Electrical and engine management parts,like sensors,etc,are probably even more prone to variances between brands.The generic brand manufacturers must be using inferior quality components because how can an oem brand ignition module last from the time the car is new until the time it reaches 100-150k miles,then as soon as you replace it with a generic brand part,it goes out within months or sometimes days?? A lifetime warranty may sound enticing,but its no fun pulling the dash apart twice to replace a 1 month old heater core or collapsed lifter,etc,etc.It almost seems like they're cleaning the part up,to make it look new/remanufactured,but yet not replacing anything internal. Apparently they must do this to sell more parts to companies like Autozone, etc, but you'd think Autozone would get tired of replacing parts like they do on their generic brand stuff?? I could understand the generic part going out in half the time/mileage of the oem brand part,but months/days compared to years/hundreds of thousands of miles is way,way out of range.
BTW- Ive had success with Mallory coils and the Crane HI 6 cd ignition box and coil Summit use to sell in a package combo deal.
They don't list it now,but other suppliers should.




Last edited by wbrockstar; 09-14-2018 at 10:10 AM.
wbrockstar is offline  
Reply With Quote
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
02 Stang
Off Topic
77
05-03-2018 11:24 AM
F150FXOnline
4.0L V6 Technical Discussions
14
12-25-2009 10:40 AM
IBleedBlue
5.0L (1979-1995) Mustang
2
06-09-2006 03:34 PM
ROUSHRGT
4.6L (1996-2004 Modular) Mustang
3
03-21-2006 09:47 AM


Thread Tools
Search this Thread
Quick Reply: Bad Ignition coil?


Advertising
Featured Sponsors
Vendor Directory

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.