Md stangers, and other close by vicinities
04-14-2008, 10:07 PM
#31
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: Md stangers, and other close by vicinities
ORIGINAL: dimebag
im out, gotta be at work from 10-12, im gonna try to get out of that, but well see
im out, gotta be at work from 10-12, im gonna try to get out of that, but well see
....here we go again!! last season the car was busted this season it's work.... take sick leave!!! I think your skert!!!!! bring that new edge out!!!!
04-15-2008, 04:13 PM
#32
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: Md stangers, and other close by vicinities
i gotta work tn(actually had to be there at 5, its now 515... ill get there eventually) im going to talk to my boss about saturday. its not that i have to work work, we have an employee meeting so i cant get it covered or anything, im going to talk to her, tell her i have some family **** goin on or something and see if i can get out of it, yall will know tonight
04-15-2008, 05:29 PM
#33
The Rogue Mod
Thread Starter
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
RE: Md stangers, and other close by vicinities
Employee meeting? F that!! Tell them to do it during reg buis hours. Where do you work?
Come on man, don't be afraid to race, I'll spot ya 10 cars!
Come on man, don't be afraid to race, I'll spot ya 10 cars!
04-15-2008, 07:00 PM
#34
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: Md stangers, and other close by vicinities
ORIGINAL: PRO50SC
Employee meeting? F that!! Tell them to do it during reg buis hours. Where do you work?
Come on man, don't be afraid to race, I'll spot ya 10 cars!
Employee meeting? F that!! Tell them to do it during reg buis hours. Where do you work?
Come on man, don't be afraid to race, I'll spot ya 10 cars!
04-15-2008, 08:27 PM
#35
5th Gear Member
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
RE: Md stangers, and other close by vicinities
ORIGINAL: PRO50SC
So what, you just gonna run the **** out of a new motor w/ no break in period?
So what, you just gonna run the **** out of a new motor w/ no break in period?
According to multiple machine shops motor break in consists of starting the car running the car at 2000rpm for 2-5minutes. Warm the car up. Shut it off, readjust the rockers, and do an oil change. Sounds like that shouldn't be a problem.
04-15-2008, 10:03 PM
#36
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: Md stangers, and other close by vicinities
ORIGINAL: ZachW04Stang
Not a new motor, but new clutch and trans. Actually the top end of the motor is new, I was given a stock shortblock to get the car running. I got the heads tonight and it should be running Thursday.
According to multiple machine shops motor break in consists of starting the car running the car at 2000rpm for 2-5minutes. Warm the car up. Shut it off, readjust the rockers, and do an oil change. Sounds like that shouldn't be a problem.
ORIGINAL: PRO50SC
So what, you just gonna run the **** out of a new motor w/ no break in period?
So what, you just gonna run the **** out of a new motor w/ no break in period?
According to multiple machine shops motor break in consists of starting the car running the car at 2000rpm for 2-5minutes. Warm the car up. Shut it off, readjust the rockers, and do an oil change. Sounds like that shouldn't be a problem.
Thread
Thread Starter
Forum
Replies
Last Post