rmodel65

that according to autozones webpage for the correct gap

mustangsneverdie

we've put a different dizzy in there and then restabbed it over and over again and it's still not firin on all cyl. i'm bout ready to say **** it and go set it on fire

jtmustang

here is a pic i have saved. start over pull dizzy out pull up to top dead on balancer and pull valve cover if u have to, make sure u put your finger over the hole and wait for a burst of air and then it should be on tdc

jtmustang

and if that helps but still not runnin good i suggest u re check rockers.

crusin92red5.0

if the distributer was in wrong it wouln't have ran strong the day before. let alone idle

mustangsneverdie

everything is new except for the plugs wires but idk y it would run s**t*y when it's idling and then run like a scalded dog when i romp down on it. it doesn't make any sense to me

mustangsneverdie

alright yall this is what it's doin you can hear its busting up but it's almost there

http://s339.photobucket.com/albums/n...urrent=006.flv