got 4 alpine spr-13c in my car run off alpine 4 channel amp.
when i have the volume turned off or down on my deck(pioneer avic-f700bt) there is still static coming through the speakers slightly. is this normal or could there be a problem that needs addressing.

**not sure if the static is still there when i turn it up because the music would drown it out.

 

try turning the gain on the amp down a bit and see what happens.

 

no thats common with the AVIC-F series turning the gains would help a little but the problem would still be there you might have to get some noise filters

 

turned the gain down, reduced the noise alot to the point it doesn't bother me. thanks 4 the help
will have a look into noise filters see if it eliminate the problem

 

what is the gain set to now? IT should never need to be more then 3/4 full.

 

its half way, not sure exactly what it set at but i set it to the middle where it says nom assuming that means normal.

another question hp lp filter what should those be set at 4 my speakers any idea?

having trouble getting it set back up on my deck had a custom tune and when i diconnected my battery everyhting erased. can't seem to get it back to how it was.

 

HP = high pass = all high freqs that would go to a mid/tweeter pass through, bass is stopped
LP = low pass = all the bass freqs that should ONLY go to a woofer pass through and treble is stopped.

For full range speakers, if you are not using a sub you will want to not use any cross over as then nothing will be playing bass. IF you have a sub then flip all the rest of the speakers to HP so that they can play what they like, and the sub can do its job.