Does anyone have or know someone who has a pair of 65/66 V8 spindles I could buy?

 

i would check ebay, thats where i got mine, if i decide to go the M2 way, ill get in contact with you though, probably wont be for a while though

 

http://www.cjponyparts.com/ has a junkyard http://www.mustangmasters.com/ http://www.perogie.com/ etc etc.

 

Does $350/pair seem a bit high? I mean I know they aren't making them any more, but really...

 

Yeah, it does seem high but that is what I paid for mine a few months ago from a local Mustang parts place.

I bought another pair on eBay a couple years ago and they were advertised as Mustang v8 spindles. They looked just like pictures of 66 Mustang spindles I had seen. It was a while before I could use them because the car was at the body shop. When I got around to putting them on, the outer tie rod hole was bigger than a Mustang. Unfortunately, I didn't notice this right away. So you do get a little piece of mind if you buy them from a company rather than eBay.

 

i payed 150 for mine, you can also get 70-72 spindles there stronger and they make em new, you just need new tie rod ends and brakes for that year spindle