Lookin for the basic bolts on for 98' cobra...
#1
Lookin for the basic bolts on for 98' cobra...
probally been alot of posts about this so i apologize ahead of time... i was wondering if anybody could hint me on some good bolts ons for my 98' cobra. im thinking along the lines a good cold air intake,headers,good exhaust (does not have to pass emissions) and if you could include pricess or links that would be apreciated thanks a bunch.... right now im thinking a bassani off road x pipe and cant think of the rest...
o0o yea also i want to drop it about .75-1.25 inches any suggestions on what to do? and also thinkin about a short shifter and a upgraded clutch
o0o yea also i want to drop it about .75-1.25 inches any suggestions on what to do? and also thinkin about a short shifter and a upgraded clutch
#2
RE: Lookin for the basic bolts on for 98' cobra...
www.ninosport.com
Get BBK longtube headers with an offroad x pipe, and magnapacks. I think you might benefit from the PI headswap if that is even necessary in the first place. As far as cold air intakes go, densecharger seem to be the most popular around here, but K&N FIPK are good too. Gearswaps will get you fantastic acceleration, letting the cobra live up to its name.
Get BBK longtube headers with an offroad x pipe, and magnapacks. I think you might benefit from the PI headswap if that is even necessary in the first place. As far as cold air intakes go, densecharger seem to be the most popular around here, but K&N FIPK are good too. Gearswaps will get you fantastic acceleration, letting the cobra live up to its name.
#3
RE: Lookin for the basic bolts on for 98' cobra...
look into eibach springs or frpp,and as for the shifter go with either the steeda tri-ax or pro 5.0, and when you get gears go with 4.30's or 4.10's atleast
Thread
Thread Starter
Forum
Replies
Last Post
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM