Will the M/T ET Street radials fit?
#1
Will the M/T ET Street radials fit?
..on our stock 17x8" bullitt style rim? I would like to get 275/40's and the recommended wheel width according to M/T is 9-11". I thought I heard of people here running those on our 8" stockers.My stockers are sitting in my shed doing nothing so i'd like to use them.Anyone using these? Thanks.
#2
RE: Will the M/T ET Street radials fit?
hey Rob,
the ET Streets do fit on the 17 x 8s in the 26X11.50-17LT size I know a few guys using them on the stockers
these:
if you mean... these... P275/40R17
which I think you do .... if its track only use I think you'll be fine... but you'll get a bulge in the sidewall
the ET Streets do fit on the 17 x 8s in the 26X11.50-17LT size I know a few guys using them on the stockers
these:
if you mean... these... P275/40R17
which I think you do .... if its track only use I think you'll be fine... but you'll get a bulge in the sidewall
#3
RE: Will the M/T ET Street radials fit?
Hey Give Brenspeed a call they can answer that question for sure. I believe the answer is yes because they do run the ET streets on stock bullitt rims...... I'm just not sure the width of the tires. 574-594-9559 or visit their site, theyre also alll over this one
#4
RE: Will the M/T ET Street radials fit?
I ran those last year on my stockers. The rims are a little narrow for the rims but they did perform great on the track. I ran them at about 12-15psi at the track. Since the rims are a little narrow for the tire, they have a tendency to wear in the middle, that's why I ran them at a little lower pressure than normal, for even wear and a better contact patch. I have purchased some 17x9's for this coming race season and will probably run them at about 18psi.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM