Eibach suspension kit?
Thread Starter
4th Gear Member
Joined: May 2012
Posts: 1,220
From: New York
I have the Eibach Pro System on mine with the J&M APB. I went with the Eibach camber bolts but will switch them out with the MM Caster/Camber plates that are sitting in a box in my garage. I should have done this from the beginning but I was being cheap! I love this set up.
Former Sponsor
Joined: Jul 2011
Posts: 2,570
From: FL
I'm running UPR Pro Series springs which are made for us by Eibach to the same specs as their Pro Kit springs. I'm also using Koni Yellows and the full UPR Pro Street suspension setup. My car dead hooks in a straight line and it corners like it's on rails.
Here's a picture of it on MM&FF's site. (mine's in the middle with UPR on the bumper):
Thread Starter
4th Gear Member
Joined: May 2012
Posts: 1,220
From: New York
I'm running UPR Pro Series springs which are made for us by Eibach to the same specs as their Pro Kit springs. I'm also using Koni Yellows and the full UPR Pro Street suspension setup. My car dead hooks in a straight line and it corners like it's on rails.
Here's a picture of it on MM&FF's site. (mine's in the middle with UPR on the bumper):
Here's a picture of it on MM&FF's site. (mine's in the middle with UPR on the bumper):
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM