nova0002@hotmail.com

so I need to buy a new a/c pulley clutch? Do I need a new compressor too?

cliffyk

[/align][/align]Can't tell by "remote control", and you won't know 'til you get the clutch working. If the AC was working before the clutch began acting up then probably not...[/align]

nova0002@hotmail.com

a/c was working and still works, I like I said it just does that funny stuff with the a/c pulley when its on. Im going to go to the Ford dealer monday and buy a new a/c clutch and try to replace that, any ideas on where to get install directions?

cliffyk

[/align][/align]Try the link in my second posting in this thread...[/align]

nova0002@hotmail.com

Do you think I need all those special tools or can I improvise with some regular tools?

cliffyk

[/align][/align]If the coil needs to be pulled off (sometimes they don't) you will need a puller--to install it you can use an appropriately sized PCV pipe coupling and a rubber hammer--make sure it'snot cockedand be gentle. If you are innovative and have access to a variety of tools you should be able to do it. [/align]