Mitch02GT

Hey all. I was really curious as to what the RWHP and torque is on a stock 02 mustang gt. I know that it comes with 260HP and 302 ft-lbs of torque at the motor. Does anyone know or have proof of what it should be around. I've heard around 230 RWHP and 270 torque. we're taking the car to the dyno in the spring. I just wanted to get an idea of what to expect. The car also has about 65,000km. Thanks

Mitch

True Blue Racing

use the search thing at the bottom of the page. there has been a few post on this.

Quick Shot xMLx

I just dynoed my car NA with only an SCT tuner and O/R mid pipe. Made 221 rwhp and 260 tq on a Dyno Dynamics(reads just like/slightly lower than a Mustang dyno). My scanner doesn't work but if it did I would post the sheet.

fruhdaddy

mine was at like 242hp and 273 trq...Its been years since then but I believe thats what it was. Its not alot but its in the 230-240 range..depending on the temp

2000GT4.6

Stock 5 speed 99-04 should dyno around 225 WHP, 5 WHP either way.

saxmanJJ

My stock 2004 GT with manual trans put out 234 RWHP.
With throttle body/plenum/CAI/Flowmasters and an SCT tune it got bumped up to 247 RWHP.

Burtonsnow157

i saw a stock 03 with just catback get 231 so probably 225 for hp and torque around 265 maybe?

Mitch02GT

Thanks Guys. At least now I have an idea of what i'm going to see on the charts. All the best. Ill post my results in the spring.

fruhdaddy

I just found mine and it was 236hp..I was off by a lil I guess.