PP Tb/Plenum
01-15-2008, 06:27 PM
#11
3rd Gear Member
Join Date: Apr 2007
Location: MA
Posts: 901
RE: PP Tb/Plenum
ORIGINAL: ThisIsMyStang
Mine was really tight! Had to use drill bit channelocks and lube! But is all good now! Another heads up when you are installing, on the the Throttle positioning sensor the phillips screws can be tough to get out and they strip easy so be patient and careful cause its plastic and can break.1 of the2 screws came right out and the last one took some cussing but it came out. Good Luck!
Mine was really tight! Had to use drill bit channelocks and lube! But is all good now! Another heads up when you are installing, on the the Throttle positioning sensor the phillips screws can be tough to get out and they strip easy so be patient and careful cause its plastic and can break.1 of the2 screws came right out and the last one took some cussing but it came out. Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
