Shane's E-Force Install Thread
Thread Starter
4th Gear Member
Joined: Aug 2008
Posts: 1,679
From: Mississippi
OK some things have come together and I will be starting Friday night! 
I have something else I have to do all of Saturday. Then I'll start back up Sunday and work until I finish. You can catch this exciting action LIVE on a streaming webcam here - http://www.ustream.tv/channel/edelbrock-e-force-install 
It better work too. I need to take a road trip in it 9/12.
Hopefully the wideband I'm putting in will give me a clue about it being safe to drive.
Scheduled 9/14 for dyno time. Woo-hoo!!!
I have something else I have to do all of Saturday. Then I'll start back up Sunday and work until I finish. You can catch this exciting action LIVE on a streaming webcam here - http://www.ustream.tv/channel/edelbrock-e-force-install It better work too. I need to take a road trip in it 9/12.
Hopefully the wideband I'm putting in will give me a clue about it being safe to drive.Scheduled 9/14 for dyno time. Woo-hoo!!!
Thread Starter
4th Gear Member
Joined: Aug 2008
Posts: 1,679
From: Mississippi
I'm not driving my car tomorrow so that it will be cool to work on when I get started. Will either start after work. There's an off chance I may take 1/2 day off and start after lunch. I'll post here when I start.
Heck, I'm doing out right now to do some preliminary stuff (no webcam) like removing the bumper, etc.
Heck, I'm doing out right now to do some preliminary stuff (no webcam) like removing the bumper, etc.
Thread Starter
4th Gear Member
Joined: Aug 2008
Posts: 1,679
From: Mississippi
What the heck...broadcasting now! But the lighting sucks and the camera needs to be a lot farther away. http://www.ustream.tv/channel/edelbrock-e-force-install
Thread Starter
4th Gear Member
Joined: Aug 2008
Posts: 1,679
From: Mississippi
Done for tonight. So far so good. Got the CAI, fuel rails, injectors, and intake manifold off.
Only one oh **** moment so far and I will have to look farther into this tomorrow. After removing my intake manifold, there was some grit & debris of course around the edges of the heads where the intake manifold used to be. One such piece of grit was a small pebble! Made me wonder if small pebble's buddy may have fallen into the head.
I will look into the head tomorrow when I have better light. Can't have gravel down in there high-fiving my valves!!!
Only one oh **** moment so far and I will have to look farther into this tomorrow. After removing my intake manifold, there was some grit & debris of course around the edges of the heads where the intake manifold used to be. One such piece of grit was a small pebble! Made me wonder if small pebble's buddy may have fallen into the head.
I will look into the head tomorrow when I have better light. Can't have gravel down in there high-fiving my valves!!!
5th Gear Member
Joined: Mar 2007
Posts: 3,062
From: Florida
Heh, good idea on the streaming. I couldn't do that though, since mine would be rated NC-17. I can't seem to do anything mechanical without getting completely frustrated yelling the "f" and "c" word a lot.
Thread Starter
4th Gear Member
Joined: Aug 2008
Posts: 1,679
From: Mississippi
LOL, I'm not streaming audio.
Progress & pics documented here - http://mshanecrowe.wordpress.com/mustang-supercharger/
Progress & pics documented here - http://mshanecrowe.wordpress.com/mustang-supercharger/
