M90 Shakedown Runs
11-25-2010, 09:55 PM
#51
5th Gear Member
Join Date: Dec 2006
Location: Redding, CA
Posts: 4,552
Boost gauage is good to look at check vacuum ocasionally and to watch for belt slip.
11-27-2010, 01:44 AM
#52
5th Gear Member
Thread Starter
Join Date: Oct 2009
Location: Maui
Posts: 4,752
The T for mine looked too small, but I used the really small hard plastic, off white colored hose. About 1/8" stuff for my line going from the vacuum to the gauge. Hopefully you can find the right stuff.
Boost gauage is good to look at check vacuum ocasionally and to watch for belt slip.
Boost gauage is good to look at check vacuum ocasionally and to watch for belt slip.
11-27-2010, 06:52 AM
#53
5th Gear Member
Join Date: Dec 2006
Location: Redding, CA
Posts: 4,552
I bought a pack with assorted sizes so one of them will fit. Gonna install Saturday. Got the oil seperator parts and its installed. Got some automotive body screws from Lowes and fixed my front lower bumper where the previous owner cracked it going over a curb. It hung down low on one side looked like **** IMO. Now its clean........ Man I love working on my car.
Thread
Thread Starter
Forum
Replies
Last Post
