bluekswiss_04

alright guys, here is my problem, im an owner of an 87 5.0 mustang and a 99 v6. i recently got my hands on the roush 427r supercharged engine. i love roush i had one in the past and i think roush has the best cars in the market right now, anyways im planning to swap the v6 engine of the 99 mustang and install the 4.6 engine 427r on it. im going to have experts doing the job, but i want to know what will be need it to do the swap, and i mean "everything".
im a mustang fan but im not that good at the mechanical part so please if you all can help me i would really appreciate it.
thanks to you all

BraMas

Your going to need a GT k-member you might as well get a nice tubular k-member. I hope you got the PCM with the engine. Check to see if you need the gas pedal from an 05 up because that engine is drive by wire not cable like in your 99

jrherald420

These "experts" will/should know what all would be needed. As far as i know no one here has done such a swap.I could be wrong but i have yet to see it.

bluekswiss_04

Ok, yeah i got the PMC, i got the transmission, the harness, the fuse box, and the motor mounts, anything else??

Pohatu18

8.8 inch Rear end and driveshaft.

Gt04

beat me to it.